Kieler Militia Supply is here to educate the masses on their rights and help shed light on firearms. We are here to support the "Unorganized Militia" and "Organized Militia". --“I ask who are the militia? They consist now of the whole people, except a few public officers.” – George Mason, Address to the Virginia Ratifying Convention, June 4, 1788


Friday, April 9, 2021

Project: Project: Civilian Marksmanship Competition Rifle Build Day 4(Continued)

 Project: Project: Civilian Marksmanship Competition Rifle Build Day 4(Continued)

Upper receiver build. After getting my Criterion barrel back from Cerakoting I decided that this would be a good time to polish the feed ramp and smooth things out for better performance.

User a Dremel and some polishing compound with the cone-shaped buffing attachment this process is fairly simple. The goal is to get rid of the machining and smoothing things to polish. Do not try to change angles we are just trying to remove rough spots.

Note: It's a good idea to plug the chamber with a cleaning patch or paper towel. to limit chances of compound going down the barrel. Also, after completely clean the barrel and chamber thoroughly.

I used the  white and green compound start with the green then finished with the white compound. I bought these giant bars from a truck stop.

Polishing the ramps is very simple, you just need to take your time.

No comments: