Kieler Militia Supply is here to educate the masses on their rights and help shed light on firearms. We are here to support the "Unorganized Militia" and "Organized Militia". --“I ask who are the militia? They consist now of the whole people, except a few public officers.”
– George Mason, Address to the Virginia Ratifying Convention, June 4, 1788
Dave Ramsey VS Glenn Beck on World Economic Forum's "The Great Reset"
We agree with Brad Long in this assessment.
As you know "The Great Reset" designed by billionaires involved with World Economic Forum has been moving forward.
All global banking charters now have "bail-in" provisions, making anyone who has a bank account an "unsecured creditor" and not the owner of your currency in the bank. This means that when or if the bank fails (whether it's their fault or not), You help make them solvent by "donating" a portion of your hard-earned cash. <-- This could happen at any time. Let's rethink your retirement plans again.
Rise of The Vaccine-Informed; New Study Exposes Mask Fail; Hepatitis Outbreak in Kids; Are You Prepared for The Food Wars?; What To Know About Rising Inflation; Farm to Your Table
Guests: Shad Sullivan, Catherine Austin Fitts, Max Kane
I wanted to build a rifle to take on the M24 Sniper Rifle. I succeeded at a fraction of the cost.
Started with the Remington 700 SPS, which had the same action barrel and Accutrigger that the Police and Military had off the shelf. Now I got that rifle at a bargain because Remington had a manufacturer rebate on the rifle. I scored it in the 300's.
Next, I took it all apart and bought the Very capable Magpul Hunter 700 stock from Cabela's. Thank you very much for the Military Discount. The current price is 259.00 I paid less when I started this project. Hunter 700 has a real nice Aluminum bed block and fully free-floats the barrel. I believe I torqued the front bolt and 70-inch lbs and rear at 65-inch lbs. I also added the Magpul Mag box to match stock and this boosted the cycling reliability tremendously. Short Action mag box 69.99
Now little did I know this was one of the rifles in the Accu Trigger Recall. It didn't matter to me I never used safety, because I've been pulling my bolt from the rifle when I walk downrange since Chris Kyle got shot with his own gun at a Texas shooting range. Taking the Firing Pin with you is safer than Safety engaged nowadays. What happened to Chris Kyle was very tragic and the nation lost a hero.
Just to be safe in case my family borrowed my rifle, I decided to change that trigger. My Rifle couldn't be sent back to Remington with the mods I had already performed. It just wouldn't fit in the box that they sent and I didn't feel like being without my rifle anyway, so I went to my gunsmith Gary Brock in Sauk Prairie, WI who works out at Wilderness Fish and Game. He did such a beautiful job on the rifle's crown, just a gorgeous job. Well, he had a nice Timney Trigger and so I bought that trigger and slapped it on.
For Optics I went with the Vortex Optics Diamondback Tactical FFP 6-24x50.
Well here is what it came out to be. A Sub MOA rifle.
200 Yards 168gr Hornady bullet 42 grains of Varget Federal Primers.
Vortex Diamondback Tactical Scope.
Went back to Gary and decided to have the barrel threaded for a Yankee Hill QD Muzzle break that will allow me to take my Titanium Yankee Hill Phantom Suppressor and interchange it between my 300 Blackout and this rifle. Worked out great. At the range, we had a little bit of crosswind. I'm sure I pulled a couple as well, but not bad for a little messing around. I will also mention I shortened the barrel a bit as well to make it easier for finding a case. I regret that decision a bit. I may come back down the road with a new barrel for this project, but as you can see still have quite a bit of performance out of it.
What Joe Biden Is Not Telling You About Ghost Guns
Why Does Joe Biden Keep Lying About People Owning Cannons?
There's been some controversy and confusion over whether or not cannons can be bought and owned by individuals, either during the Revolutionary War or today. Well, let's answer the question once and for all!
Thousands Turn Out For Defeat The Mandates; Speaker/Emcee Reflects on Rally; Brutal Lockdowns in China; US Confused Over Covid Policy; The Pandemic of Human Trafficking; Del’s Message for Humanity
Governor Anthony (Tony) Evers is bad for Wisconsin, bad for society, bad for science, and just all-around bad. Tony Evers's actions speak louder than words. His actions say he supports medical discrimination against persons of disability, his actions say he's for big pharma and doesn't care about your pre-existing conditions or religious beliefs. Remember that when you're voting. Tony Evers protects the companies that are exempted from liability for their damaging products.
Tony Evers believes DEATH, MYOCARDITIS, BLOOD CLOTS, and BRAIN ANEURYSMS are all acceptable short-term side effects of the Covid 19 Vaccines for you and your children. We can't even talk about Long Term Side Effects because that's still being evaluated.
Tony Evers like some of our Federal agencies has traded real science for political science.
On 4/8/2022, Gov. Evers vetoed Assembly Bill 675, relating to: natural immunity to COVID-19 in lieu of proof of vaccination or test.
“This bill provides that if an employer requires an employee to provide proof of having received a vaccine against COVID-19, or to be regularly tested for COVID-19 as a condition of continued employment or an offer of employment, the employer is required to accept, in lieu of proof of such vaccination or regular testing, documentation demonstrating natural immunity against the SARS-CoV-2 coronavirus—either documentation showing that the individual tested positive for COVID-19 or documentation of a serology test that shows the presence of naturally occurring antibodies against SARS-CoV-2 in the individual's blood. Under the bill, the documentation must be dated after March 1, 2020, and be signed by a health care provider licensed in the United States or a territory of the United States.”
It’s a shame Gov. Evers does not acknowledge natural immunity. It saddens us that he once again refuses to assist the people of Wisconsin in removing barriers for families to feed their children and put a roof over their families' heads in sole support of a medical procedure that carries very real risks, including the risk of death.
And some entertainment from Blind Joe "I Will Not Comply" Official Video
Join JP Sears for an exclusive sit-down interview with Klaus Schwab himself! The leader of the World Economic Forum opens up and speaks very candidly about his plans for you, and the future of our planet! Featuring The Great Reset, Fourth Industrial Revolution, and More!
Just a few studies about mask efficacy for those inquiring minds:
It appears that several of the links originally included have been removed (surprise, surprise). But that's ok, because there's plenty more where those came from. Like these right here:
This study is the first RCT of cloth masks, and the results caution against the use of cloth masks. This is an important finding to inform occupational health and safety. Moisture retention, reuse of cloth masks and poor filtration may result in increased risk of infection. Further research is needed to inform the widespread use of cloth masks globally. However, as a precautionary measure, cloth masks should not be recommended for HCWs, particularly in high-risk situations, and guidelines need to be updated.”
Prolonged wearing of the surgical mask causes loss of intellect potential and cognitive performance due to a decrease in blood oxygen and subsequent brain hypoxia. Note - some changes may be irreversible.
"Seventy percent of the patients showed a reduction in partial pressure of oxygen (PaO2), and 19% developed various degrees of hypoxemia. Wearing an N95 mask significantly reduced the PaO2 level" https://www.ncbi.nlm.nih.gov/pubmed/15340662
"Wearing N95 masks results in hypooxygenemia and hypercapnia which reduce working efficiency and the ability to make correct decision." ... "Medical staff are at increased risk of getting 'Severe acute respiratory syndrome' (SARS), and wearing N95 masks is highly recommended by experts worldwide. However, dizziness, headache, and short of breath are commonly experienced by the medical staff wearing N95 masks. The ability to make correct decision may be hampered, too." https://clinicaltrials.gov/ct2/show/NCT00173017 https://www.researchgate.net/…/7332926_Headaches_and_the_N9…
The attorneys that represent ICAN are representing the plaintiff in a lawsuit against the FDA to obtain Pfizer’s covid vaccine documents. They recently secured an unredacted copy of a previously produced post-authorization adverse event report. The lifted redactions reveal that within weeks of Pfizer’s vaccine being administered pursuant to emergency use authorization, Pfizer, apparently unexpectedly, had to hire 600 full time employees “to help alleviate the large increase of adverse event reports” being received by the company.
You can find initial redacted copy of the report here and the unredacted copy here with the redactions lifted on page 6.
The lifted redactions also reveal the number of doses that had been shipped as of the date of the report (just over 126 million doses), offering at least some denominator to assist in understanding the volume of reports following vaccination. Notably, this is the number of doses shipped and the report does not disclose the number of doses administered by the date of the report.
ICAN will continue to review the incoming documents as they are made public and will continue to share them with our supporters.
AR10 / SR25 / LR-308 Build Project KMS-PR-MK1 ISSUE FOUND AND FIX
Re-engineering a solution to a bolt catch release button being held back when upper receiver was attached.
During testing and tuning we noticed bolt failed to lock back and even when manually locking back it was very sensitive to touch and bolt would fly forward.
So here is what I found and what I did to fix the issue.
The issue bolt catch was being held back by upper and barely catching a bolt tooth.
Too much material on the button and found marks where it hits the upper..
All kinds of travel when upper is off.
It crosses into bottom of upper when traveling up and is held down by upper too far.
Rub mark
The fix. Very carefully remove interfering material
Test fitting.
Full Bolt catch as it's intended to be. Easily locks back on empty mag.
Before
AFTER
Reliable, dependable and ready to go. This Sub-MOA Rifle is ready to kick rear and take names. with My homemade .308 cartridges using 168 Grain bullets, 42 grains of Varget-some Gun powder, and Federal primers.
